EasyManuals Logo

HP Compaq 6000 Pro User Manual

HP Compaq 6000 Pro
125 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #117 background imageLoading...
Page #117 background image
Table A-2 Diagnostic Front Panel LEDs and Audible Codes (continued)
Activity Beeps Possible Cause Recommended Action
Red Power LED flashes eleven
times, once every second,
followed by a two second
pause. Beeps stop after fifth
iteration but LEDs continue until
problem is solved.
11 The current processor does
not support a feature
previously enabled on this
system.
1. Install a TXT capable processor.
2. Disable TXT in the Computer Setup (F10)
utility.
3.
Reinstall the original processor.
System does not power on and
LEDs are not flashing.
None System unable to power
on.
Press and hold the power button for less than 4
seconds. If the hard drive LED turns green, the
power button is working correctly and the system
board needs to be replaced.
OR
Press and hold the power button for less than 4
seconds. If the hard drive LED does not turn on
green then:
1. Check that the unit is plugged into a working
AC outlet.
2. Open hood and check that the power button
harness is properly connected to the system
board.
3. Check that both power supply cables are
properly connected to the system board.
4. Check to see if the 5V_aux light on the
system board is turned on. If it is turned on,
then replace the power button harness. If the
problem persists, replace the system board.
5. If the 5V_aux light on the system board is
not turned on, remove the expansion cards
one at a time until the 5V_aux light on the
system board turns on. It the problem
persists, replace the power supply.
Interpreting POST Diagnostic Front Panel LEDs and Audible Codes
109

Table of Contents

Other manuals for HP Compaq 6000 Pro

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Compaq 6000 Pro and is the answer not in the manual?

HP Compaq 6000 Pro Specifications

General IconGeneral
Tcase72.4 °C
Bus typeFSB
SteppingC0
Processor cache6 MB
Processor cores2
Processor modelE8500
Processor familyIntel® Core™2 Duo
Processor seriesIntel Core 2 Duo E8000 Series
Processor socketLGA 775 (Socket T)
Processor codenameWolfdale
Processing Die size107 mm²
Processor frequency3.16 GHz
Processor cache typeL2
Processor lithography45 nm
Processor system typeDP
Processor manufacturerIntel
Processor front side bus1333 MHz
Processor operating modes64-bit
ECC supported by processorNo
Thermal Design Power (TDP)65 W
Processor core voltage (AC)0.850/1.3625 V
Number of processors installed1
CPU multiplier (bus/core ratio)9.5
Number of Processing Die Transistors410 M
PlatformPC
LightScribeYes
Power supply typeAC/DC
Security featuresTPM 1.2
External drive bays2 x 5.25\
Internal drive bays2 x 3.5\
Networking featuresGigabit Ethernet
Compliance industry standardsIEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Audio systemRealtek ALC261
Motherboard chipsetIntel® Q43
Audio output channels2.0 channels
Memory slots4x DIMM
Internal memory4 GB
Internal memory typeDDR3-SDRAM
Maximum internal memory16 GB
Memory layout (slots x size)2 x 2 GB
HDD size3.5 \
HDD speed7200 RPM
HDD interfaceSATA
Optical drive typeDVD-RW
Total storage capacity500 GB
Discrete graphics card modelNot available
On-board graphics card modelIntel® GMA 4500
On-board graphics card familyIntel® GMA
Operating system installedWindows 7 Professional
USB 2.0 ports quantity10
Firewire (IEEE 1394) ports0
Cabling technology10/100/1000Base-T(X)
Ethernet LAN data rates10, 100, 1000 Mbit/s
Chassis typeMicro Tower
Product colorBlack
Country of originChina
Cable lock slot typeKensington
Number of 3.5\" bays3
Power supply320 W
Processor codeSLAPK
Processor ARK ID33911
Processor package size37.5 x 37.5 mm
Weight and Dimensions IconWeight and Dimensions
Depth430 mm
Width176 mm
Height377 mm
Weight9300 g

Related product manuals