6–20 Hardware and Software Guide
Hardware Options and Upgrades
Removing or Inserting a Memory Module
Å
WARNING: To prevent exposure to electrical shock, access only the
memory compartment during this procedure. The memory compartment
and the battery and hard drive bays are the only user-accessible internal
compartments on the notebook. All other areas that require a tool to
access should be opened only by a service partner.
Å
WARNING: To prevent exposure to electrical shock and damage to
the notebook, shut down the notebook, unplug the power cord, and
remove the battery pack before installing a memory module.
Ä
CAUTION: To prevent damage to electronic components: before
beginning this procedure, discharge yourself of static electricity by
touching a grounded metal object. For more information about
preventing electrostatic damage, refer to the “Electrostatic Discharge”
section of the Regulatory and Safety Notices guide, on the Notebook
Documentation CD.
1. Save your work and shut down the notebook. If you are
unsure whether the notebook is off or in Hibernation, turn the
computer on and then shut it down through the operating
system.
2. Disconnect all external devices connected to the notebook.
3. Disconnect the power cord.
4. Turn the notebook upside down.
To Next Page
Loading...
Need help?
General
