HP Compaq nx9600 User Manual

Power
Hardware and Software Guide 3–11
Initiating or Resuming from Standby
Task Procedure Result
Initiate Standby With the notebook on, use
either of the following
procedures:
■ Press the fn+f5 hotkey.
■ Select Start > Turn off
Computer > Stand by.
■ The power/standby
light blinks.
■ The screen is cleared.
Allow the system
to initiate
Standby
■ If the notebook is running
on battery power, the
system initiates Standby
after 10 minutes of
notebook inactivity (default
setting).
■ If the notebook is running
on external power, the
system does not initiate
Standby.
■ Change power settings and
timeouts in the Power
Options window.
■ The power/standby
light blinks.
■ The screen is cleared.
Resume from
user-initiated or
system-initiated
Standby
Perform one of the following
actions:
■ Press the power/standby
button.
■ Press any key on the
keyboard.
■ Touch the TouchPad to
initiate TouchPad activity.
■ The power/standby light
is turned on.
■ Your work returns to
the screen.

HP Compaq nx9600 Specifications

General

Brand	HP
Model	Compaq nx9600
Category	Laptop
Language	English