4–6 Hardware and Software Guide
Multimedia
Connecting the Video
To transmit video signals through the S-Video-out jack, you will
need a standard S-Video cable, available from most computer or
electronics retailers.
To connect the S-Video cable:
1. Plug either end of the S-Video cable into the notebook
S-Video-out jack.
2. Plug the other end of the cable into the S-Video input
connector on the external device.
3. If the image is not displayed on your external device, restart
the notebook.
Displaying a Video Image
To display an image on the notebook display or a video device
display, both the notebook and the video device must be
turned on.
To switch the image between the notebook display and the video
device display:
» Press the fn+f4 hotkey. The fn+f4 hotkey toggles the image
between the notebook display, the video device display, and
both displays simultaneously.
To Next Page
Loading...
Need help?
General
