8Ć25 TroubleshootingC4699Ć90000
(and most frequent causes)
(and most frequent causes)
Firmware
A.01.00
selftest.c 1522 Failure in RAM SIMM test:
RAM SIMM badly connected.
Faulty RAM SIMM.
Faulty electronics module.
selftest.c 1526 Failure in RAM SIMM test:
RAM SIMM badly connected
Faulty RAM SIMM
Faulty electronics module.
selftest.c 1569 Failure in Fibis test:
Faulty electronics module.
selftest.c 1573 Failure in Fibis RAM sequence test:
Faulty electronics module.
selftest.c 1579 Failure in Condor test:
If firmware is revision A.01.02 or
earlier, then change to latest.
Faulty electronics module.
ipc.c 813 or
824
The SPROC did not respond within 10
seconds:
Faulty electronics module.
media_load.c 681 or
2403 or
2430 or
2619
Bail error or YĆaxis servo error:
Carriage knocked against bail.
Faulty encoder strip.
Faulty trailing cable.
Faulty carriage.
error.c 536 Processor error:
Faulty electronics module.
miInterface.c 1973 or
1997
Mechanical problem when the carriage
attempts to position itself over the service
station. Check the mechanics.
To Next Page
Loading...
