HP DesignJet 250C - Removing the Trailing Cable Guide

6Ć36 Removal and Replacement
C4699Ć90000
Removing the TrailingĆCable
Guide
 Remove the right bracket  page 6Ć21.
 Remove the back cover  page 6Ć33.
 Remove the trailing cable  page 6Ć34.
 Slide the trailingĆcable guide to the right,
releasing it from the leftĆbracket tab.
 Rotate the trailingĆcable guide back on its
hinge, until it clicks off from the chassis
beam.
 Remove the trailingĆcable guide from the
plotter.