6Ć27 Removal and ReplacementC4699Ć90000
Removing the PinchĆArmĆLever
Linkage
Remove the right endĆcover page 6Ć10.
Ease the front plastic part of the linkage
to the right, out from the hole in the right
sideĆplate.
Remove the linkage from the cam journal
on the right sideĆplate.
Removing the Primer
Remove the left endĆcover page 6Ć9.
Disconnect the four tubes from the
ink separator.
Remove the screw that attaches the
primer to the left sideĆplate.
Torx-20
Slide the primer to the left, and remove it
from the plotter.
To Next Page
Loading...
