Service
Configuration
Shift
Ready
Ready
Cancel Media
Type
8Ć51 TroubleshootingC4699Ć90000
To print the service configuration plot:
In service mode , load a sheet in portrait orientation.
In normal mode, load a sheet in portrait orientation.
The service configuration plot can be plotted without the need to enter the service
mode. This is because the customer will be requested to plot the service configuration
plot and he will be given the following instructions to plot it without entering the
service mode.
When the
Ready LED lights up:
Hold down the
SHIFT key and press Service Configuration.
Press the
Cancel and Media Type keys together.
The
Ready
light begins to flash and then remains on (steady).
The plotter plots the service configuration plot and ejects the media.
Unload the media.
To Next Page
Loading...
