6Ć29 Removal and ReplacementC4699Ć90000
Removing the BailĆLift
Mechanism
Remove the bail page 6Ć5.
Remove the primer page 6Ć27.
Remove the service station page 6Ć28.
pushing the top of the bailĆgear
assembly towards the front of the plotter,
the following:
On the engaging lever, move the cable
ball slightly towards the back of the
plotter.
Allow the engaging lever to move
towards the left of the plotter, so that
the cable comes free of the lever.
Release the cable from the engagingĆlever
support.
Release the cable from the bailĆgear
assembly.
To Next Page
Loading...
