Configuring Your System
3–4
Displaying Your Configuration
AlphaBIOS provides clear, easy-to-read display of the system configuration. The display
is organized by systemboard, memory, hard disk, PCI, SCSI, and integrated devices. From
the AlphaBIOS Setup screen, select Display System Configuration and press [Enter].
From the Display System Configuration screen, use the arrow keys to select the
configuration category you wish to view. Figure 3–3 shows the Systemboard
Configuration category.
Figure 3–3: Display System Configuration Screen
Memory Configuration
The memory configuration display shows bank size, the starting address of each bank, and
the capacity of the SIMMs in the bank.
Hard Disk Configuration
The hard disk configuration screen displays information about recognized disk drives. The
display includes the drive type and capacity as well as partition sizes and formats. The
lowest-numbered drive is displayed as drive 0, even though its SCSI ID may be 1 or
higher.
To Next Page
Loading...
