HP Digital AlphaStation 255 Family - Show Command; Table 3-7: SRM Show Command

Configuring Your System
3–16
Show Command
The show command displays the current value of a specified environment variable. The
show command also displays information about the system, according to the arguments
entered.
The syntax of the show command is:
show [{config, device, hwrpb, memory, pal, version,
<envar>...}]
The show command options are described in Table 3–7.
Table 3–7: SRM Show Command
Command Option Description
config Displays the current memory configuration, PCI logical
slots, and ISA logical slots (based on ISACFG utility input
to the configuration database).
device [device name] Displays the devices and controllers in the system.
Specifying a device name returns information on that
device only.
<envar> Displays the value of the environment variable specified.
error Displays error log information.
map Displays the system virtual memory map.
memory Displays the memory module configuration.
pal Displays the version of OpenVMS and OSF PALcode.
version Displays the version of the console firmware.