Configuring Your System
3–17
Show Command Examples
Table 3–8 lists show command examples and their descriptions.
Table 3–8: SRM Show Command Examples
Command Description
>>>show device
dka0.0.0.6.0 DKA0 RZ26L 441A
dka400.4.0.6.0 DKA400 RRD43 3213
dva0.0.0.0.1 DVA0
ewa0.0.0.12.0 EWA0 08-00-2B-E2-1C-25
pka0.7.0.6.0 PKA0 SCSI Bus ID 7
Lists device information, such
as system designation, drive
model, or Ethernet address.
>>>show memory
64 Meg of System Memory
Bank 0=32 MB (8 MB per Simm)
Starting at 0x2000000
Bank 1=32 MB (8 MB per Simm)
Starting at 0x0
Bank 2=No Memory Detected
Lists system RAM, bank sizes,
and starting addresses.
Bank 2 is always unused in the
AlphaStation 255 system.
>>>show *
(See the environment variable section.)
Lists all variables and their
settings.
>>>show boot*
(See the environment variable section.)
Lists all variables beginning
with boot.
To Next Page
Loading...
