Configuring Your System
3–10
OS Selection Setup
Each operating system selection is a set of information that describes the disk and partition
containing OSLOADER.EXE.
Figure 3–7: Operating System Selection
Running a Maintenance Program
A maintenance program, such as a RAID configuration utility, is run directly from the
AlphaBIOS utility menu.
To run a maintenance program, follow this procedure:
1. Start AlphaBIOS setup, select Utilities, select Run Maintenance Program from the
submenu, and press [Enter].
2. In the Current Partition field, select the hard-disk partition, floppy disk, or CD-ROM
drive from which to run the program. Type the program name into the Program Name
field.
To Next Page
Loading...
