5–1
5
Troubleshooting
Introduction
This chapter describes initial and system troubleshooting.
F
Refer to the documentation supplied with additional options if you are
experiencing problems with specific options that you have installed.
Initial Troubleshooting
Follow these general procedures to initially troubleshoot your Digital AlphaStation 255
system:
1. Check that the power indicator is on and that the fan is running.
2. Check the power indicator on the monitor. Also, check the monitor, keyboard, and
mouse cables to ensure that they are connected and seated properly.
3. Press the Reset button. Try rebooting your system.
4. Make sure that all cables and connections are secure.
5. Contact Digital Services or your service provider for software- or hardware-related
problems.
__________________________NOTE ____________________________
If you need to return a failed component, pack it in its original container and
return it to Digital Equipment Corporation or your service provider.
____________________________________________________________
To Next Page
Loading...
