HP Digital AlphaStation 255 Family - Set Command Examples; Table 3-5: SRM Set Command; Table 3-6: SRM Set Command Examples

Configuring Your System
3–15
Table 3–5 describes the SRM set command options.
Table 3–5: SRM Set Command
Command Option Description
<envar> The environment variable to be assigned a new value.
<value> The value that is assigned to the environment variable. It
can be either a numeric value or an ASCII string.
-default Restores an environment variable to its default value.
-integer Creates an environment variable as an integer.
-string Creates an environment variable as a string.
Set Command Examples
Table 3–6 shows set command examples and their descriptions.
Table 3–6: SRM Set Command Examples
Command Description
>>>set bootdef_dev ewa0
The default boot device is set to ewa0.
>>>set auto_action boot
The console attempts to boot following an error, halt, or
power-up.
>>>set boot_osflags 0,1
The default boot flags are set to 0,1.
>>>set foobar 5
An environment variable called foobar is created and given
a value of 5.