Configuring Your System
3–21
When you press [Return], the entry is submitted and checked for conflicts. If conflicts
exist, a message is displayed. For example, if you entered an IRQ value of 8 instead of 5,
the following message is displayed:
ISACFG MESSAGE: ERROR: IRQ conflict with reserved IRQ values
(0,2,8,11 or 13)
If you entered a DMA value of 2 rather than nothing, the following message is displayed:
ISACFG MESSAGE: ERROR: DMA conflict with slot 0 dev 5
You can delete an entire entry by using the [Backspace] key.
ISACFG Utility Command Format
The syntax of the ISACFG command is:
isacfg [-slot <slot#>] [-dev <device#>]
[-all|-rm|-mk|-mod] [-<field> <value>] . . .
The ISACFG command options are described in Table 3–10.
To Next Page
Loading...
