Installing System Options
4–13
1
2
MLO-013214
Figure 4–7: Removing the CD-ROM Drive Bracket
5. Lift the CD-ROM assembly up and out of the system unit as Figure 4–7 shows. The
CD-ROM drive is secured within the bracket by two screws. It is not necessary to
remove the cables from the CD-ROM. For convenience, you can rest the CD-ROM
assembly on the power supply.
6. Referring to Figure 4–8, remove the locking pin and push in the button latch
on the
right side of the enclosure to release the drive tray.
7. Slide the drive tray back
and lift it up and out of the enclosure.
To Next Page
Loading...
