HP DL360 User Manual

Cabling 70
Cabling
Cabling overview
This section provides guidelines that help you make informed decisions about cabling the server and
hardware options to optimize performance.
For information on cabling peripheral components, refer to the white paper on high-density deployment at
the HP website (http://www.hp.com/products/servers/platforms
).
CAUTION: When routing cables, always be sure that the cables are not in a position where
they can be pinched or crimped.
Hard drive backplane cabling
The server ships with one hard drive backplane that supports four hard drives. Installation of the optional,
second hard drive backplane enables the server to support eight hard drives.
• Hard drive backplane

HP DL360 Specifications

General

Processor Sockets	2
CPU	Intel Xeon Scalable
Memory	Up to 3TB DDR4
Form Factor	1U Rack
Power Supply	Redundant Power Supplies, various wattage options
Network Controller	Embedded 1Gb or 10Gb Ethernet
RAID Support	Smart Array RAID
Operating System Support	Windows Server, Linux, VMware
Storage	Up to 10 SFF SAS/SATA/NVMe drives or 4 LFF SAS/SATA drives