HP E24t G4 - Page 16

13
S3
1) Pull out the lamp wire from the Panel as the picture 1.
2) Tear off 2 pieces of acetate adhesive tape on the SHD and Panel as the picture 2.
3) Unlock 3 TRIM screws
4) Disassemble the TRIM.
PICTURE 1 PICTURE 2
S4
1) For BOE: Unlock 11 MF screws as the picture 1.
2) Except BOE: Unlock 12 MF screws as the picture 2.
3) Tear off a piece of big acetate adhesive tape on the LVDS FFC as the picture 3.
4) Pull out the LVDS FFC from Panel
5) Disassemble the SHD from the MF.
6) Disassemble the MF from the Panel.
PICTURE 1 PICTURE 2 PICTURE 3
S5
Disassemble the I/F BD from the SHD and extract the P/BD wire as the picture 1.
PICTURE 1
For BOE
Except BOE
Power
BD
Main BD