HP E2620 User Manual

4 – Index
port LEDs
description … 1-9, 2-22
normal operation … 2-8
ports
10/100Base-TX, location on switch … 1-5
connecting to … 2-15
console … 2-25
HP Auto-MDIX feature … B-4
location on unit … 2-21
network connections … 2-15
RPS, location on unit … 2-21
power connector … 1-13
Power LED … 1-6, 2-22
behavior during self test … 2-8
behaviors … 1-6, 2-22
location on switch … 1-5
power source
connecting the switch to … 2-15
Power-over-Ethernet
PoE … 2-19
PoE power … 1-3
precautions
mounting the switch … 2-3
power requirements … 2-3
preparing the installation site … 2-6
Proactive Network tools
diagnostics with … 4-9
R
rack
mounting precautions … 2-3
mounting the switch in … 2-9
recycle statements … D-1
Redundant and External Power Supply … 1-3
Redundant Power Supply … 2-19
regulatory statements … C-9
Reset button
description … 1-11
location on switch … 1-5, 1-11
restoring factory default configuration … 4-12
resetting the switch
factory default reset … 4-12
location of Reset button … 1-11
troubleshooting procedure … 4-10
RPS/EPS … 2-19
operation … 2-20
S
safety and regulatory statements … C-1
safety specifications … A-4
segment switch
sample topology … 2-28, 2-32
self test
Fault LED behavior … 2-8
LED behavior during … 2-8
Power LED behavior … 2-8
Self Test LED … 1-8
behavior during factory default reset … 4-12
behavior during self test … 2-8
serial cable
for direct console connection … 2-26
SFP ports … 1-2
slots for mini-GBICs
location on switch … 1-5
specifications
acoustic … A-3
cable length … A-3
cabling … B-1
connectors … A-3
distance … B-2
electrical … A-1
environmental … A-2
physical … A-1
safety … A-4
straight-through cable
pin-out … B-6, B-8
subnet mask
configuring … 3-2
switch
connecting to a power source … 2-15
description … 1-1
downloading new software … 4-13
electrical specifications … A-1
environmental specifications … A-2
features … 1-13
front panel description … 1-5
included parts … 2-1
LED descriptions … 1-6
mounting in a rack or cabinet … 2-9
mounting on a wall … 2-14
mounting on horizontal surface … 2-15
physical specifications … A-1
switch operation
verifying after installation … 2-6

HP E2620 Specifications

General

Model	HP E2620
Jumbo Frame Support	Yes
Manageable	Yes
Ports	24 or 48 10/100/1000 ports
Uplink Ports	4 SFP ports
Layer	Layer 2
Management	Web, CLI, SNMP
PoE Support	Available on some models (PoE+)
MAC Address Table Size	16000 entries
Operating Temperature	0°C to 45°C
Switching Capacity	Up to 128 Gbps
Throughput	Up to 95.2 Mpps
Weight	3.7 kg
Operating Humidity	15% to 95% non-condensing