Computer Setup—Advanced
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
WARNING! Setting items on this menu to incorrect values may cause your system to malfunction.
Table 3-2 Computer Setup—Advanced
Option Description
CPU Type (view only)
CPU Speed (view only)
Cache RAM(L2) (view only)
Cache RAM(L3) (view only)
Primary Video Adapter Allows you to select the boot display device when more than 2 video options are offered by the
system:
●
PCIe-x1
●
PCIe-x16
SATA Controller Mode If SATA Controller is enabled, allows you to set the mode to:
●
IDE
●
AHCI
●
RAID
SATA Controller Allows you to disable/enable the SATA Controller.
Onboard LAN Allows you to disable/enable onboard LAN controller.
Onboard LAN Boot
ROM
Allows you to disable/enable the boot ROM of the onboard LAN chip.
USB Ports Allows you to individually disable/enable USB ports.
Onboard 1394 Allows you to enable/disable all 1394 ports.
Supervisor Password Allows you to establish, disable, or change the supervisor password.
User Password Allows you to establish, disable, or change the user password.
NOTE: Only displays if a Supervisor password is set.
Onboard Audio Allows you to set the onboard audio to:
●
Auto
●
Disabled
●
Enabled
ESC:Boot Menu Allows you to enable/disable the option to press the Esc key to access the Boot menu during
computer startup.
F9:Diagnostics Allows you to enable/disable the option to press the F9 key to access the Diagnostics menu during
computer startup.
F10:Setup Allows you to enable/disable the option to press the F10 key to access the Setup menu during
computer startup.
10 Chapter 3 Computer Setup (F10) Utility
To Next Page
Loading...
Need help?
General