3. Remove the cable between the speakers from the clips (3), and then remove the speakers from the
computer (4) .
Reverse this procedure to install the speakers.
Card reader board
To remove the card reader board, use this procedure and illustration.
Table 6-3
Card reader board description and part number
Description Spare part number
Card reader board N08543-001
Card reader board cable (included in cable kit) N08556-001 (FPC)
N08557-001 (FFC)
Before removing thecard reader board, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 40).
2. Remove the bottom cover (see Bottom cover on page 40).
3. Remove the battery (see Battery on page 41).
Remove the card reader board:
1. Disconnect the cable that secures the card reader board to the system board (1), and remove it (2).
50
Chapter 6Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
