1. Loosen the ve captive Torx T5 screws that secure the bottom cover to the computer.
2. Starting near the hinges, use a nonmarking, nonconductive tool to release the edges of the bottom
cover from the computer (1).
3. Remove the bottom cover from the computer (2).
To replace the bottom cover, reverse the removal procedures.
WLAN module
To remove the WLAN module, use this procedure and illustration.
Table
5-2 WLAN module descriptions and part numbers
Description Spare part number
Intel Wi-Fi 6 AX201 + Bluetooth 5 (802.11ax 2 × 2, vPro) L92722-005
Intel Wi-Fi 6 AX201 + Bluetooth 5 (802.11ax 2 × 2, non-vPro) L92724-005
IMPORTANT: To prevent an unresponsive system, replace the wireless module only with a wireless module
authorized for use in the computer by the governmental agency that regulates wireless devices in your
country or region. If you replace the module and then receive a warning message, remove the module to
restore device functionality, and then contact technical support.
Component replacement procedures 31
To Next Page
Loading...
