2. Remove the speakers from the computer (2) .
Reverse this procedure to install the speakers.
Card reader board
To remove the card reader board, use this procedure and illustration.
Table 6-13 Card reader board description and part number
Description Spare part number
Card reader board M03883-001
Card reader insert (included in Plastics Kit) M46068-001
Card reader board cable (included in Cable Kit) M03867-001
Before removing the card reader board, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 30).
2. Remove the bottom cover (Bottom cover on page 30).
3. Remove the battery (see Battery on page 38).
4. Remove the left speaker (see Speakers on page 54).
5. Remove the system board (see System board on page 51).
Remove the card reader board:
1. Remove the three Phillips M2.0 × 2.0 screws (1) that secure the card reader to the computer.
2. Lift the top of the board up to about a 45° angle (2).
Component replacement procedures 55
To Next Page
Loading...
