2. Scan the following QR code.
3. Exit programming mode by scanning the following QR code.
The bar-code scanner inserts a carriage return after each scanned bar code until you either repeat the
previous procedure or restore the default settings (see Restoring default settings on page 33).
Conguring the bar-code scanner volume
The tablet is shipped with the tone and volume of the bar-code scanner turned o.
To turn on the tone and adjust the volume:
1. Open programming mode by scanning the following QR code.
2. Scan one of the following QR codes:
●
To set the volume to low:
32 Chapter 5 Detailed functions
To Next Page
Loading...
