Need help?Do you have a question about the HP FlexNetwork MSR3064 and is the answer not in the manual?
General| Device Type | Router |
|---|---|
| Form Factor | Rack-mountable |
| Connectivity Technology | Wired |
| Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet |
| Flash Memory | 32 MB |
| Redundant Power Supply | Optional |
| Product Type | Router |
| Ports | 4 x 10/100/1000Base-T |
| Interfaces | 4 x 10/100/1000Base-T |
| Routing Protocols | RIP-1, RIP-2, OSPF, IS-IS, GRE |
| Firewall Throughput | 2.5 Gbps |
| VPN Throughput | 1.6 Gbps |
| Remote Management Protocol | SNMP 1, SNMP 2, SNMP 3, RMON, Telnet, CLI |
| Management | Web Based Management |
| Encryption Algorithm | AES, DES, 3DES, MD5, SHA-1 |
| Authentication Method | RADIUS, TACACS+ |
| Features | Firewall protection, VPN support, VLAN support, Quality of Service (QoS), IPv6 support, MPLS support |
| Compliant Standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab |
| Power Device | Power supply |
| Operating Temperature | 32 °F |
| Dimensions (W x D x H) | 17.32 x 15.75 x 1.73 in |
| Dimensions | 17.32 x 15.75 x 1.73 in |
General safety guidelines and symbols for installation.
Keep installation areas clear and ensure stable, dry, anti-slip conditions.
Guidelines for safe handling of electrical components and power sources.
Precautions for handling fiber optic ports to prevent eye injury.
Measures to prevent electrostatic discharge damage to components.
Guidelines to prevent electromagnetic interference.
Methods to protect the router from lightning strikes.
Requirements for mounting the router in a standard equipment rack.
Conditions that must be met before installing the router.
Instructions for securely placing the router on a workbench.
Steps for mounting the router into an equipment rack.
Detailed clearance specifications for rack installation of MSR routers.
Step-by-step guide for securing the router within a rack.
How to ground the router using a rack's grounding terminal.
Procedure for installing AC or DC power supplies.
Procedure for installing a Power over Ethernet (PoE) power supply.
Pre-power-on checks for correct installation and connections.
Step-by-step guide for replacing a router power supply.
To Next Page