EasyManuals Logo

HP HP-UX 11i v3 User Manual

HP HP-UX 11i v3
125 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #82 background imageLoading...
Page #82 background image
packets going through the network and loopback and header information. Log messages are
written to the /var/adm/nettl.LOG000 file. To format and view the contents of this file, enter
the following command:
# netfmt -v -f /var/adm/nettl.LOG000 | more
Look for Error and Disaster messages.
APA also supports the logging of status messages to the syslog.log file. See “Logging messages
to the syslog.log file” (page 43) for information on enabling this feature.
You can access the logging and tracing utility using either the graphical user interface (GUI)
version or the command line interface. The GUI version does the following:
Guides you through logging and tracing tasks.
Enables you to create and format reports.
Collects logging and tracing information specific to a subsystem.
Displays report screens that are updated instantaneously with current logging and tracing
information by the subsystem.
Provides context-sensitive on-line help.
To access the GUI version of the logging and tracing utility, enter the following command:
nettladm
There are three levels of logging:
At link aggregate level
At Cisco's FEC level
At IEEE 802.3ad LACP level
The following examples show how to perform different tasks from the command line:
To turn on all logging at link aggregate level, enter:
nettl -log 0xf -e HP_APA
To turn on all logging at Cisco's FEC level, enter:
nettl -log 0xf -e HP_APAPORT
To turn on all logging at IEEE 802.3ad level, enter:
nettl -log 0xf -e HP_APALACP
To examine the log file with cause and action descriptions, enter:
netfmt -v -f /var/adm/nettl.LOG00 | more
To examine just the log messages in the log file, enter:
netfmt -f /var/adm/nettl.LOG00
To check network logging and tracing status, enter:
nettl -status
To start Cisco's FEC tracing to the file /tmp/tracefile.TRC0, enter:
nettl -traceon all -entity HP_APAPORT -file /tmp/tracefile
To stop Cisco's FEC tracing, enter:
nettl -traceoff all -entity HP_APAPORT
To start LACP tracing to the file /tmp/tracefile.TRC0, enter:
nettl -traceon all -entity HP_APALACP -file /tmp/tracefile
82 Troubleshooting HP APA

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP HP-UX 11i v3 and is the answer not in the manual?

HP HP-UX 11i v3 Specifications

General IconGeneral
BrandHP
ModelHP-UX 11i v3
CategorySoftware
LanguageEnglish

Related product manuals