HP HPE StoreOnce 5100 Series User Manual

Table 16 RBSU settings for HPE StoreOnce 3500 Series and HPE StoreOnce 5100
System
Change to...
Current default
stateSub menu 2Sub menu 1Top menu item
Legacy BIOS modeUEFI ModeBoot ModeBoot options
Maximum
performance
Balanced Power and
Performance
HP Power ProfilePower Management
Options
Enabled - i.e Turn
NUMA off for the OS
DisabledNode interleavingAdvanced
Performance Tuning
Options
Performance
Options
HPE 3520:
794751-B21
Product IDAdvanced System
ROM Option
Advanced Options
HPE 3540:
797731-B21
HPE 5100:
794752-B21
Increased coolingOptimal CoolingThermal
configuration
As appropriateTime (hh:mm:ss)Date and Time
As appropriateUTC-07:00,
Mountain Time (US
& Canada)
Time zone
PhysicalAutoBIOS Serial Console
Port
BIOS Serial Console
and EMS
Only if 'enabled' in
the first place
DisabledEmbedded User
Partition
USB Options
5. Press F10 to save. Then press ESC until the System Utilities menu is displayed.
At this point, you can either press ESC to exit System Utilities and continue with the system
reboot.
Or, if there are no DHCP–assigned IP addresses, you can manually configure iLO using the
local console. Select System Configuration.
6. Select the iLO 4 Configuration Utility.
After replacing the motherboard—BIOS and iLO configuration 39

HP HPE StoreOnce 5100 Series Specifications

General

Brand	HP
Model	HPE StoreOnce 5100 Series
Category	Storage
Language	English