7. Select Network Options.
8. Configure your network settings and press F10 to save.
9. Press ESC until you exit System Utilities and can continue with the system reboot.
Warranty serial numbers
After power up, it is necessary to re-write warranty serial numbers into BIOS. Please contact
HPE Support for assistance in doing this.
Once this has been done, use the Rescan button on the Remote Support — Entitlement page
of the StoreOnce GUI to view the warranty details. (Or use the StoreOnce CLI command, system
scan devices.)
40 Replacing the system’s motherboard
To Next Page
Loading...
Need help?
General