Need help?Do you have a question about the HP J4900B and is the answer not in the manual?
General| Device Type | Switch |
|---|---|
| Model | J4900B |
| Ports | 24 |
| Port Type | 10/100/1000Base-T |
| Layer | Layer 2 |
| Manageable | Yes |
| Form Factor | Rack-mountable |
| Power Supply | Internal |
| VLAN Support | Yes |
| Jumbo Frame Support | Yes |
| Switching Capacity | 48 Gbps |
| Forwarding Rate | 35.7 Mpps |
| Power Consumption | 30 W |
| Management | Web, CLI |
Overview of the switch's front panel components, including ports and LEDs.
Details the types, speeds, and features of the switch's network ports.
Step-by-step guide and safety/environmental guidelines for installation.
Essential steps for initial switch setup, including IP addressing and password.
How to manage the switch using its IP address via Telnet or web browser.
Common issues and initial checks for resolving network switch problems.
Using LED patterns to identify and diagnose switch or port problems.
How to reset the switch to factory settings and update its software.
General safety warnings, grounding requirements, and servicing precautions.
To Next Page
