A-3
Switch Specifications
Switch Specifications
Connectors
■ The 10/100/1000 Mbps RJ-45 twisted-pair ports are compatible with the
following standards:
• IEEE 802.3ab 1000Base-T
• IEEE 802.3u 100Base-TX
• IEEE 802.3 10Base-T
■ The 1000 Mbps LC fiber-optic ports on the Gigabit-SX and Gigabit-LX mini-
GBIC transceivers are compatible with the IEEE 802.3z Gigabit-SX and
Gigabit-LX standards.
■ EPS connector: A 2x7 Molex Micro-Fit connector should be used for EPS
connection.
■ RPS connector: A 2x7 connector is provided for external RPS connection
on the power supply module.
Cable Length
■ EPS cables are 2.0 meters (6.56 feet) in length
■ RPS cables are 1.25 meters (4.10 feet) in length
Safety
Complies with:
■ EN60950 / IEC 6095
■ CSA 22.2 No. 950
■ UL 60950
Lasers
The Gigabit-SX LC mini-GBIC, and the Gigabit-LX LC mini-GBIC, both of
which can be installed in the Series 2600 Switches, are Class 1 Laser Products.
Laser Klasse 1
These mini-GBICs comply with IEC 60825.
To Next Page
Loading...
Need help?
General
