4-68
Web and MAC Authentication
Configuring MAC Authentication on the Switch
Figure 4-43. Example of show port-access mac-based config Command Output
Syntax: show port-access mac-based config [port-list]
Displays the currently configured MAC Authentication
settings for all switch ports or specified ports, including:
• MAC address format
• Support for RADIUS-assigned dynamic VLANs (Yes or
No)
• Controlled directions setting for transmitting Wake-on-
LAN traffic on egress ports
• Authorized and unauthorized VLAN IDs
If the authorized or unauthorized VLAN ID value is 0, the
default VLAN ID is used unless overridden by a RADIUS-
assigned value.
HP Switch(config)# show port-access mac-based config
Port Access MAC-Based Configuration
MAC Address Format : no-delimiter
Allow RADIUS-assigned dynamic (GVRP) VLANs [No] : No
Client Client Logoff Re-Auth Unauth Auth Cntrl
Port Enabled Limit Moves Period Period VLAN ID VLAN ID Dir
----- -------- ------ ------ ------ ------- -------- ------- ----
1 No 1 No 300 0 0 0 both
2 Yes 1 No 300 0 0 0 in
...
To Next Page
Loading...
Need help?
General
