HP J8697A User Manual

8-8
Configuring Secure Shell (SSH)
Configuring the Switch for SSH Operation
Configuring the Switch for SSH
Operation
SSH-Related Commands in This Section Page
show ip ssh 8-17
show crypto client-public-key [<manager | operator>]
[keylist-str] [< babble | fingerprint>]
8-29
show crypto host-public-key [< babble | fingerprint >] 8-14
show authentication 8-24
crypto key < generate | zeroize > [autorun-key [rsa] |
cert [rsa] <keysize> | ssh [ dsa | rsa [bits <keysize>]]
8-10
ip ssh 8-17
cipher <cipher-type> 8-17
filetransfer 8-17
ip-version 8-17
mac 8-18
port < 1 - 65535|default > 8-16
timeout < 5 - 120 > 8-16
listen <oobm | data | both> 8-18
aaa authentication ssh
login < local | tacacs | radius | public-key > 8-20, 8-31
< local | none > 8-20
enable < tacacs | radius | local > 8-20
< local | none > 8-20
copy tftp pub-key-file <tftp server IP>
<public key file> [<append | manager | operator>]
[oobm]
8-28
clear crypto client-public-key [keylist-str] 8-30
ssh [user <username | username@>] <hostname | IPv4
| IPv6> [port <1-65535>]
8-32
copy sftp ssh-client-key [user <username |
username@>] <hostname | IPv4 | IPv6> <private-key-
filename> [port <tcp-port-num>]
8-33

HP J8697A Specifications

General

Ports	24
Form Factor	Rack-mountable
Power Supply	Internal
Management	Managed
VLAN Support	Yes
Jumbo Frame Support	Yes
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Model	HP J8697A
Port Type	10/100/1000BASE-T
Layer	Layer 2