HP J8697A User Manual

15-9
Using Authorized IP Managers
WebAgent: Configuring IP Authorized Managers
WebAgent: Configuring IP Authorized
Managers
In the WebAgent you can configure IP Authorized Managers as described
below.
To Add, Modify, or Delete an IP Authorized Manager address:
1. In the navigation tree, click on Security.
2. Click on IP Authorization.
3. Click on Add Address to add an IP Authorized Manager.Enter the appro-
priate parameter settings for the operation you want.
4. To delete an IP authorized Manager, select the Authorized Address and
click on Delete.
5. To change IP Authorization parameters, click on Change in the IP Autho-
rization Details box. Enter the information and click on Save.
Figure 15-5. Example of Configuring Authorized Manager Access Method in the WebAgent

HP J8697A Specifications

General

Ports	24
Form Factor	Rack-mountable
Power Supply	Internal
Management	Managed
VLAN Support	Yes
Jumbo Frame Support	Yes
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Model	HP J8697A
Port Type	10/100/1000BASE-T
Layer	Layer 2