6-33
RADIUS Authentication, Authorization, and Accounting
Using SNMP To View and Configure Switch Authentication Features
Changing and Viewing the SNMP Access Configuration
For example, to disable SNMP access to the switch’s authentication MIB and
then display the result in the Excluded MIB field, you would execute the
following two commands.
Syntax: snmp-server mib hpswitchauthmib < excluded | included >
included: Enables manager-level SNMP read/write access to the
switch’s authentication configuration (hpSwitchAuth) MIB.
excluded: Disables manager-level SNMP read/write access to the
switch’s authentication configuration (hpSwitchAuth) MIB.
(Default: included )
Syntax: show snmp-server
The output for this command has been enhanced to display the
current access status of the switch’s authentication configuration
MIB in the Excluded MIBs field.
To Next Page
Loading...
Need help?
General
