HP J8697A User Manual

10-4
IPv4 Access Control Lists (ACLs)
Overview of Options for Applying IPv4 ACLs on the Switch
clients. For information on RADIUS-assigned ACLs assigned by a RADIUS
server, refer to the chapter titled “Configuring RADIUS Server Support for
Switch Services”.
Note This chapter describes the IPv4 ACL applications you can statically configure
on the switch. For information on static IPv6 ACL applications, refer to the
chapter titled “IPv6 Access Control Lists (ACLs)” in the latest IPv6 Configu-
ration Guide for your switch.

HP J8697A Specifications

General

Ports	24
Form Factor	Rack-mountable
Power Supply	Internal
Management	Managed
VLAN Support	Yes
Jumbo Frame Support	Yes
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Model	HP J8697A
Port Type	10/100/1000BASE-T
Layer	Layer 2