6-35
RADIUS Authentication, Authorization, and Accounting
Controlling WebAgent Access
Controlling WebAgent Access
To help prevent unauthorized access through the WebAgent, do one or more
of the following:
■ Configure the switch to support RADIUS authentication for
WebAgent access (Web Authentication, Chapter 7).
■ Options for the switches covered in this guide:
• Configure local authentication (a Manager user name and password
and, optionally, an Operator user name and password) on the switch.
• Configure the switch’s Authorized IP Manager feature to allow
WebAgent access only from authorized management stations. (The
Authorized IP Manager feature does not interfere with TACACS+
operation.)
• Use one of the following methods to disable WebAgent access to the
switch via http (Port 80):
CLI: no web-management
Menu Interface—From the Main menu, select the following:
2. Switch Configuration
1. System Information
Web Agent Enabled: No
To Next Page
Loading...
