HP J9574A Access Security Guide

2-25
Configuring Username and Password Security
Front-Panel Security
Reset Button
Pressing the Reset button alone for one second causes the switch to reboot.
Figure 2-8. Press and hold the Reset Button for One Second To Reboot the Switch
Restoring the Factory Default Configuration
You can also use the Reset button together with the Clear button (Reset+Clear)
to restore the factory default configuration for the switch. To do this:
1. Press and hold the Reset button.
2. While holding the Reset button, press and hold the Clear button.
3. Release the Reset button.
Reset Clear
Reset Clear
Reset Clear

HP J9574A Specifications

General

Brand	HP
Model	J9574A
Category	Switch
Language	English