8-29
Configuring Secure Shell (SSH)
Further Information on SSH Client Public-Key Authentication
Note copy usb pub-key file can also be used as a method for copying a public key file
to the switch.
For example, if you wanted to copy a client public-key file named clientkeys.txt
from a TFTP server at 10.38.252.195 and then display the file contents:
Figure 8-14. Example of Copying and Displaying a Client Public-Key File Containing Two Different Client
Public Keys for the Same Client
show crypto client-public-key [<manager | operator>] [keylist-str] [babble
| fingerprint]
Displays the client public key(s) in the switch’s current
client-public-key file.
See “SSH Client Public-Key Authentication” on page
2-16 in this guide for information about public keys
saved in a configuration file.
The babble option converts the key data to phonetic
hashes that are easier for visual comparisons.
The fingerprint option converts the key data to hexadec-
imal hashes that are for the same purpose.
The keylist-str selects keys to display (comma-delimited
list).
The manager option allows you to select manager public
keys
The operator option allows you to select operator public
keys.
To Next Page
Loading...
