EasyManuals Logo

HP J9574A Access Security Guide

HP J9574A
732 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #685 background imageLoading...
Page #685 background image
14-37
Configuring and Monitoring Port Security
Reading Intrusion Alerts and Resetting Alert Flags
Figure 14-15.Example of an Unacknowledged Intrusion Alert in a Port Status Display
If you wanted to see the details of the intrusion, you would then enter the show
port-security intrusion-log command. For example:
Figure 14-16.Example of the Intrusion Log with Multiple Entries for the Same Port
The above example shows three intrusions for port A1. Since the switch can
show only one uncleared intrusion per port, the older two intrusions in this
example have already been cleared by earlier use of the clear intrusion-log or
the port-security < port-list > clear-intrusion-flag command. (The intrusion log
holds up to 20 intrusion records, and deletes intrusion records only when the
log becomes full and new intrusions are subsequently added.) The “prior to
text in the record for the third intrusion means that a switch reset occurred
at the indicated time and that the intrusion occurred prior to the reset.
To clear the intrusion from port A1 and enable the switch to enter any
subsequent intrusion for port A1 in the Intrusion Log, execute the port-security
clear-intrusion-flag command. If you then re-display the port status screen, you
HP Switch(config)# show int brief
Status and Counters - Port Status
| Intrusion MDI Flow Bcast
Port Type | Alert Enabled Status Mode Mode Ctrl Limit
------ --------- + --------- ------- ------ ---------- ---- ---- -----
B1 100/1000T | Yes Yes Up 1000FDx MDI off 0
B2 100/1000T | No Yes Up 1000FDx Auto off 0
B3 100/1000T | No Yes Up 1000FDx Auto off 0
B4 100/1000T | No Yes Up 1000FDx Auto off 0
Intrusion Alert on port B1.
Dates and Times of
Intrusions
MAC Address of latest
Intruder on Port 1
Earlier intrusions on
port 1 that have already
been cleared (that is,
the Alert Flag has been
reset at least twice
before the most recent
intrusion occurred.
HP Switch(config)# show port-security intru-
sion-log
Status and Counters - Intrusion Log
Port MAC Address Date / Time
------ ------------- ------------------------
--
1 080009-e93d4f 09/07/11 21:09:34
1 080009-21ae84 09/07/11 17:06:27
1 080009-e93d4f 09/07/11 17:18:43

Table of Contents

Other manuals for HP J9574A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP J9574A and is the answer not in the manual?

HP J9574A Specifications

General IconGeneral
BrandHP
ModelJ9574A
CategorySwitch
LanguageEnglish

Related product manuals