HP LaserJet 3200 - Changing the default number of copies

EN Default Copy Settings 129
Changing the default number of copies
You can choose to have the default number of copies be any value
from 1 to 99. The default set at the factory is 1.
To change the default number of copies
1 Press ENTER/MENU.
2 Use the < or > key to select
Copy Setup and press ENTER/MENU.
3 Use the < or > key to select
default # of copies and press
E
NTER/MENU.
4 Enter the number of copies from 1 to 99 that you want as the
default.
5 Press E
NTER/MENU to save your selection.