EN Loading print media 31
Selecting the output path
Selecting the output path determines whether printed media come out
of the paper output bin or out of the front paper output slot. Choose
the front paper output slot if you are printing on special media, such
as 28 lb (100 g/m
2
) or heavier weight paper, envelopes,
transparencies, or labels. This prevents wrinkling and paper curl.
To select the output path
l To use the paper output bin, make sure that the front paper path
door is closed.
- Or -
l To eliminate curl, use the straight-through paper path by opening
the front paper path door. All printed media coming out of the
front paper output slot will be in reverse order.
Note To avoid jams, keep the area in front of the front paper path slot clear
so that media can easily exit the slot, and make sure the front paper
path door is completely open.
To Next Page
Loading...
