44 Chapter 3 - Managing General Default Settings, Logs, and Reports EN
Setting the fax activity log to print
automatically
The fax activity log provides a chronological history of the last 40
faxes that were received, sent, or deleted, as well as any errors that
occurred. You can decide whether or not you want the fax log to print
automatically after every 40 entries. The factory default is On.
To set when the fax log prints
1 Press ENTER/MENU.
2 Use the < or > key to select
REPORTS, and then press ENTER/
M
ENU.
3 Use the < or > key to select
FAX ACTIVITY LOG.
4 Press > once to select
AUTO. LOG PRINTING, and then press
E
NTER/MENU.
5 Use the < or > key to select
ON or OFF, and then press ENTER/
M
ENU to confirm your selection.
To Next Page
Loading...
