HP LaserJet 3200 - Printing all fax reports; Printing a T.30 protocol trace report

50 Chapter 3 - Managing General Default Settings, Logs, and Reports EN
Printing all fax reports
Use this procedure to print the following reports at one time:
l Fax activity log
l One-touch, speed-dial, and group-dial report
l Configuration report
l Block fax list
To print all fax reports
1 Press ENTER/MENU.
2 Use the < or > key to select
REPORTS, and then press ENTER/
M
ENU.
3 Use the < or > key to select
ALL FAX REPORTS, and then press
E
NTER/MENU. The product exits the Menu settings and prints the
reports.
Printing a T.30 protocol trace report
This report is used by service technicians to troubleshoot fax
transmission issues.
To print a T.30 protocol trace report
1 Press ENTER/MENU.
2 Use the < or > key to select
SERVICE and press ENTER/MENU.
3 Use the < or > key to select
PRINT T.30 TRACE and press
E
NTER/MENU.
4 Use the < or > key to select
NOW and press ENTER/MENU. The
product exits the Menu settings and prints the reports.