EN Scanning from the product control panel 141
3 Select the Perform this action when the device Scan button is
pressed check box.
4 Select an item from the Destination list, and then click the Add
button.
5 Click the Edit button.
6 Type the name of the destination how you want it to appear on
the control panel display in the Application Destination Name
box. If the destination you are adding is an e-mail address, type
the e-mail address in the Email Address box.
7 Repeat steps 4 through 6 for other destinations.
Mac OS
1 Open the HP LaserJet Director by double-clicking the alias for the
HP LaserJet Director that appears on the desktop as shown
below.
To Next Page
Loading...
