190 Chapter 8 - Problem Solving and Product Maintenance EN
Misformed characters
1 Print a few more pages to see if the problem corrects itself.
2 Make sure that the environmental specifications for the printer
are maintained.
Scanned images are too light or too dark
1 Adjust the resolution and/or contrast setting(s) from the dialog
box that appears after you click Scan on the HP LaserJet
Director.
2 If the original was on a colored media, including a brown recycled
paper, the text might not be clear. Try adjusting the resolution,
contrast, and/or brightness settings from the dialog box that
appears after you click Scan on the HP LaserJet Director.
3 The product might need recalibration. See “Recalibrating the
scanner” on page 216.
To Next Page
Loading...
