HP Latex 300 Series User Guide

9. The printer searches for the reference line on the substrate. If it fails to find it, the front panel asks you
to move the substrate using the Rewind substrate and Advance substrate keys until the reference line is
aligned with the permanent line on the platen. You may find it useful to mark where the reference line is
on the other side of the substrate.
View information about the substrate
On the front panel's home screen, press .
The following information appears on the front panel, if any substrate is loaded:
●
The substrate type
●
The substrate name
●
The substrate width in millimeters (estimated by the printer)
●
The remaining length of the substrate, if known
●
The printing zone (platen or ink collector)
●
The take-up reel status
●
Whether double-sided printing is selected
●
The color calibration status
If no substrate is loaded, the message Out of substrate appears.
The same information appears on the Embedded Web Server's Supplies page.
ENWW View information about the substrate 77

HP Latex 300 Series Specifications

General

Brand	HP
Model	Latex 300 Series
Category	Printer
Language	English