9. When you have finished, press Continue to perform color calibration.
NOTE: ICC profiles are created for the 360 printer only.
10. Enter your substrate name and click Start color calibration. See Color calibration on page 97.
11. After the automatic color calibration process has completed, we recommend using the generic ICC
profile; alternatively, you can choose to create a new profile or to copy a profile already assigned to a
different print mode for this substrate (if there are any such profiles). The Create ICC profile button is
disabled until color calibration is complete. See
ICC profiles on page 101.
Change settings while printing
94 Chapter 4 Substrate settings ENWW
To Next Page
Loading...
Need help?
General
