Speakers
Description Spare part number
Speakers (includes left and right speakers and tape) 738404-001
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Battery on page 32), and then remove the following components:
a. Service door (see
Service door on page 33)
b. Base enclosure (see
Base enclosure on page 55)
Remove the speakers:
1. Position the top cover upside down, with the battery bay facing you.
2. Disconnect the speaker cables (1) and (4) from the system board.
3. Remove the two Phillips screws (2) and (5) that secure the speakers to the base enclosure.
Component replacement procedures 65