EasyManuals Logo

HP mt41 User Manual

HP mt41
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #99 background imageLoading...
Page #99 background image
9 Statement of Volatility
The purpose of this document is to provide general information regarding non-volatile memory in
industry-standards based HP Business Notebook PC systems and provide general instructions for
restoring nonvolatile memory that can contain personal data after the system has been powered off
and the hard drive has been removed.
HP Business Notebook PC products that use AMD®-based system boards contain volatile DDR
memory. The amount of nonvolatile memory present in the system depends upon the system
configuration. AMD-based system boards contain nonvolatile memory subcomponents as originally
shipped from HP assuming that no subsequent modifications have been made to the system and
assuming that no applications, features, or functionality have been added to or installed on the
system.
Following system shutdown and removal of all power sources from an HP Business Notebook PC
system, personal data can remain on volatile system memory (DIMMs) for a finite period of time and
will also remain in nonvolatile memory. The steps below will remove personal data from the notebook
PC, including the nonvolatile memory found in AMD-based system boards. Some of these steps are
disclosed in the Maintenance & Service Guides available for HP PC products available on the product
support pages at
www.hp.com.
1. Follow steps (a) through (j) below to restore the nonvolatile memory that can contain personal
data. Restoring or re-programming nonvolatile memory that does not store personal data is
neither necessary nor recommended.
a. Enter BIOS (F10) Setup by powering on the system and pressing F10 when prompted near
the bottom of the display, or press the ESC key to display the start up menu, then press
F10. If the system has a BIOS administrator password, enter the password at the prompt.
b. Select Main > Restore Defaults.
c. Select the Security menu, and then Restore Security Level Defaults.
d. If an asset or ownership tag is set, select the Security menu and scroll down to the
Utilities menu. Select System IDs, and the select Asset Tracking Number. Press the
spacebar once to clear the tag, then press Enter to return to the prior menu.
e. If a DriveLock password is set, select the Security menu, scroll down to Hard Drive Tools
under the Utilities menu, select Hard Drive Tools, select DriveLock, then uncheck
DriveLock password on restart.
f. If an Automatic DriveLock password is set, select the Security menu, scroll down to Hard
Drive Tools under the Utilities menu, select Hard Drive Tools, scroll down to Automatic
DriveLock, then select the desired hard drive and disable protection. At the automatic drive
lock warning screen, select Yes to continue. Repeat this procedure if more than one hard
drive has an Automatic DriveLock password.
g. Select the Main menu, then Reset BIOS Security to factory default. Click yes at the
warning message.
h. Select the Main menu, then Save Changes and Exit.
89

Table of Contents

Other manuals for HP mt41

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP mt41 and is the answer not in the manual?

HP mt41 Specifications

General IconGeneral
Form factorClamshell
Product typeMobile thin client
Product colorSilver
Country of originChina
Processor cache1 MB
Processor cores2
Processor modelA4-5150M
Processor familyAMD A4
Processor frequency2.7 GHz
Processor manufacturerAMD
Processor boost frequency3.3 GHz
Motherboard chipsetAMD A76M FCH
Memory slots2x SO-DIMM
Internal memory4 GB
Memory clock speed1600 MHz
Internal memory typeDDR3-SDRAM
Maximum internal memory8 GB
SSD capacityThe Solid State Drive's storage capacity in Gigabytes.
Storage mediaSSD
Optical drive typeNo
Card reader integratedYes
Total storage capacity16 GB
Compatible memory cardsSD
Number of SSDs installed1
Display surface-
Display diagonal14 \
Display resolution1366 x 768 pixels
Native aspect ratio16:9
Discrete graphics card modelNot available
On-board graphics card modelAMD Radeon HD 8350G
On-board graphics card familyAMD Radeon HD 8000
Wi-Fi standards802.11a, 802.11b, 802.11g
Ethernet LAN data rates10, 100, 1000 Mbit/s
Mobile network generation3G
Charging port typeDC-in jack
USB 2.0 ports quantity0
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity4
Pointing deviceTouchpad
Operating system installedWindows Embedded Standard
Battery capacity55 Wh
Battery life (max)8.5 h
Number of battery cells6
AC adapter power65 W
Weight and Dimensions IconWeight and Dimensions
Depth237 mm
Width340 mm
Height25.3 mm
Weight2080 g

Related product manuals